Page 32 - SAMA HSE PLAN

Sama Global HSE Plan December 2023

Employees are trained in the use, limitations, storage and inspection of respiratory equipment prior to initial
use and annually thereafter. This training includes fit‐testing the equipment to the user as outlined in the
Respiratory Protection Program. All equipment is cleaned and maintained, with written documentation, by:
________________________________________________________________________________________

10.14.7 Fall Protection

Fall protection is required any time a fall hazard exists. Safety harnesses/lanyards are inspected
by:______________________________________ on a ___________________ basis.
‫ﻤﯿـــــﺔ‬S‫ﺎﻟ‬A‫ﻟﻌ‬M‫ﺎ ا‬A‫ـــ‬G‫ﻤــ‬L‫ﺳ‬OBAL
10.15 Environmental/Occupational Health Programs

Formal monitoring programs exist to ensure that all identified health hazards are properly controlled.

 Monitoring is being conducted by: __________________________________________

 Review of monitoring and evaluation of the data is conducted by: __________________

Documentation of monitoring is maintained at: ________________________________________________

10.16 Medical Surveillance/Exposure Monitoring

Medical surveillance/physicals/exposure monitoring are conducted on a periodic basis for the following:

 OSHA regulated chemicals
 ______________________________________________________________
 ______________________________________________________________
 ______________________________________________________________

 Other medical surveillance
 ______________________________________________________________
 ______________________________________________________________
 ______________________________________________________________

 Biological monitoring
 ______________________________________________________________
 ______________________________________________________________
 ______________________________________________________________

 Exposure monitoring (personnel and area)
 ______________________________________________________________
 ______________________________________________________________

________________________________ is responsible for conducting exposure monitoring. Exposure
monitoring shall be conducted at least every ____________________ man‐hours worked.

10.17 Inspections

Inspections of shops, fabrication areas, storage areas, etc. are the responsibility of the direct supervisor to
ensure safe conditions and activities in his/her area of responsibility. Supervisors shall be trained and
qualified to conduct inspections in their representative area. Proof of inspector’s training/qualifications is
included in ____________________________________________ (attach to plan).

Inspections of all areas will be conducted as follows:

Revision B For Sama Global Use Only Page 30 of 60